F系列有載分接開關
F Series on-load Tap-changer

有載分接開關.具有結構先進，動作可靠，使用壽命長，維護方便等優點，適用與50Hz，設備最高電壓在40.5kV及以下額定電流在400A及以下的三相油浸式變壓器。
This kind of on-load tap-changer has the merits of advanced structure, operating reliably, long useful life and maintenance freely, It is suitable for oil-immersed three-phases transformer with frequency 50Hz, Highest voltage for equipment 40.5KV and below and rated current under 400A and below.
 

有載分接開關型號含義
Type of on-load tap-changer

有載分接開關調壓原理圖
On-load tap-changer schematic diagram for voltage regulation

有載分接開關控制器安裝尺寸
On-load tap-changer controller installation size

12kV有載分接開關外形安裝圖
Overall and installation drawing for 12kV on-load tap-changer

12kV有載分接開關線端調壓、中部跨接外形安裝圖
Overall and installation drawing for 12kV line terminal voltage regulation on-load tap-changer

12kV(級電壓1000V)有載分接開關中性點調壓外形安裝圖
Overall diagram for 12kV(Step Voltage 1,000V) Neutral point regulation on-load tap-changer

開關型號帶A表示開關最大級電壓為1000
Vo A-stand for the max. step voltage is 1000 V

12kV(級電壓1000V)有載分接開關線端調壓外形安裝圖
Overall and installation drawing for 12kV line terminal voltage regulation on-load tap-changer

1.開關型號帶A表示開關最大級電壓為1000V;
2.10kV有載開關控制器電纜配長15m.
1.A-stand for the max. step voltage is 1000 V:
2.The length of the cable for 1 0kV on-load tap-changer is 15 Meters

消弧線圈用有載分接開關
The on-load tap-changer are applicable to arc suppression coil

額定電流200A及以下.設備最高電壓12kV, 40.5kV.分接位置數7-14級。
It's rated current is 200A and below， the highest voltage of equipment is 12kV and 40.5kV, numbe fo the operation
position 7-14.
 

FJ 1, -125--200112-15140A

FJ 11-125-y200/40.5-15140A
 

FD III₁-400/10-10090有載分接開關
FD III₁-400/10-10090 On-load tap-changer

統一設計40.5kV有載分接開關外形及安裝圖
Overall and installation drawing for 40.5kV on-load tap-changer in uniform design

40.5kV有載開關控制器電纜配長20m

The length of the cable for 40.5kV on-load tap-changer is 20 Meters